Product overview
Adapter board to plug an S Series ECU directly in to an OEM wiring loom.
This adapter uses the Bosch 80 pin connector that is widely used by many OEM manufacturers, and found on many Bosch ECUs, such as the M3.x ECU used by VW, Audi, and many others.
As this is an adapter board, it can be adapted for multiple wiring loom versions. All that’s needed is to specify different wiring pinouts on the adapter loom to suit. This means that this adapter will support many different configurations, including different numbers of cylinders.
The price includes the adapter board and 300mm wiring loom to plug the ECU in to the adapter. Longer looms, as well as custom looms, can be supplied at extra cost.
Includes connector for a GM map sensor. 3 and 4 bar versions available from us separately.Supported Configurations
Currently the adapter board supports the Bosch M3.8 ECU as used on the VW/Audi AGU & AJL engines.
ECU firmware V80.11 and up supports the later versions of dashboards that use the VW CAN stream, so the standard dashboard will still work.
Earlier versions can be used with the older dashboards that are not CANcontrolled.We will be expanding the range of manufacturers supported. If there’s a car you wish to use it on that’s not shown as supported, please get in touch.
Product features
OEM wiring looms used, so plug and play VW CAN data stream on firmware v80.11 and up Compatible with all S Series ECUs
DTA 80 Pin Adaptor
ECU is supplied bare, no plugs or wiring is included unless the appropriate option is selected.
ECU bought with pre-wired plugs is recommended but will require fitting correctly for your selected engines loom.
We recommend a professional fitting as ECU's can be easily damaged and no warranty can be offered due to damage from incorrect fitting.